First of all, you need an iPhone (everyone know it ^_^), then you will need your email account information such as Username, password, incoming and outgoing Server (you can get it from your host provider).

1. go to your iPhone Settings > Mail, Contacts, Calendars > Accounts and choose Add Account…

2. Choose your email account type. For setting up email to work with IT-Paradise.com service choose Other.

3. Select Add Mail Account under the Mail section and enter account information.

4. Fill in your name and email address.  Then click Save.

On the next screen enter your account details, including the following.

• Incoming Mail Server

  Host Name: mail.yourdomainname.com
  User Name: username@yourdomainname.com
  Password: yourpassword

• Outgoing Mail Server (SMTP)
  Host Name: mail.yourdomainname.com
  User Name: username@yourdomainname.com
  Password: yourpassword

Tap Save to save the entered information.  Your iPhone will then verify your account information.

5. Upon successful completion you will be taken back to the Mail Settings screen.

You should now have a fully configured email account on your Apple iPhone.

This is Jasper new buddy named “Brownie”.

Jasper slowly take his present.

Jasper and Brownie in photo.

Doing the same posing. So cute.

We had dinner at The Gardens and brought some Valentine presents.

Here’s the 2010 Valentine Present…

Louis Vuitton (LV) wallet.

A pair of CYMA Watches.

Beside the above, I would like to share with you’ll for this unique gift received from a client today. Nice rite?

This is my Art Director, Din Tan.Lynn handsome husband, Leo.Some shot behind the scene.Look at her… doing funny faces.
Something behind the scene.
misc shot…P/S: Lynn Lim = Lim Pey Yeng, Astro Artist & Fabula Sdn Bhd Products Ambassador.

Nice weather… blue sky with white cloud.

That’s the Australia International School campus behind my car, imaging if you study here… natural and fresh.

I’ve been trying to load Maybank2U website since yesterday 10pm to settle some of my utilities bill, but it show “Problem loading page”, I thought its might be the Streamyx problem.

I have try to reboot my modem, using different browser and computer, but still can’t open the page. I even tried the direct login URL “https://www.maybank2u.com.my/mbb/m2u/common/M2ULogin.do?action=Login”, but still not success.

But I do the same again this morning and still can’t get the Maybank2U website loaded. Can you load the page?

After waited for 3 years, finally the talent which hacked iphone in year 2007 found the way to hack the supposed to be unhackable Sony Play Station 3 (PS3).

Heard from the source, this hack will take 5% of hardware 95% on software, but the full details is not ready to be reveal yet, until he refining the technique.

Once this hacking details is posted online, everyone will benefiting from it, and you will be able to install your own Operating System and play home-made games, and it also allow people to play the older PS2 games. The most important is, it will allow people to run pirated games.

Don’t believe the news? check out BBC News.

A friend downloaded the above software last week after his computer return from a Hard Disk upgrade, but ended up with malware infection instead of protection. He can’t format the Hard Disk because all his business email stored in this computer.

He was so helpless because the can’t get through his computer maintenance guy, so he called me up… then, I gonna travel down to his office and check out his problem, lucky his office is nearby my house.

After 10mins of debugging, and I found out the Internet Security 2010 is NOT a antivirus/anti-adware, it’s the one causing all the problem.

Internet Security 2010 is a rogue anti-spyware program that is installed through the use of malware. Once installed, it will run automatically once Windows start. It will then scan your computer and display numerous infections, but will not remove anything until you purchase the program. These infections, though, are all fake and are only being shown to trick you into thinking you are infected so that you then purchase the program.

Below is the screen shot of the error message and fake scan result it will keep prompt you, some may even had his wallpaper changed with a Virus Warning.

You can’t uninstall it from Control Panel or by removing its EXE file, you need some tools to safely remove this stupid software.

Tools you required:-

1. rkill.com (to kill all the Internet Security 2010 process)
2. Malwarebytes’ Anti Malware (to scan and remove all installed Malware)
3. Malwarebytes’ EXE (to replace the Malware affected exe)

The removal procedure is as below:-

IMPORTANT: DO NOT REBOOT YOUR COMPUTER UNTIL YOU COMPLETE THE LAST STEP.

1. First, we run rkill.com to kill all the Internet Security 2010 process. Please be patient while the program looks for various malware programs and ends them. When it has finished, the black window will automatically close and you can continue with the next step. If you get a message that rkill is an infection, do not be concerned. This message is just a fake warning given by Internet Security 2010 when it terminates programs that may potentially remove it. If you run into these infections warnings that close Rkill, a trick is to leave the warning on the screen and then run Rkill again. By not closing the warning, this typically will allow you to bypass the malware trying to protect itself so that rkill can terminate Internet Security 2010 . So, please try running Rkill until malware is no longer running. You will then be able to proceed with the rest of the guide.
2. Install and run Malwarebytes’ Anti Malware, leave all the default setting but uncheck both of the Update Malwarebytes’ Anti-Malware and Launch Malwarebytes’ Anti-Malware check boxes. Then click on the Finish button. If Malwarebytes’ prompts you to reboot, please do not do soIf you receive a code 2 error while installing Malwarebytes’s, please press the OK button to close these errors as we will resolve them in future steps. The code 2 error will look similar to the image below.
   
3. As this infection deletes a core executable of Malwarebytes’ we will need to put a new copy of it and put it in the C:\program files\Malwarebytes’ Anti-Malware\ folder. The downloaded EXE will have a random filename. Please leave the filename the way it is as it is important that it is not changed. You may want to write down the name of the file as you will need to know the name in the next step.
4. Double click the Step 3 EXE file, MBAM will now start and you will be at the main program screen as shown below.
   
5. Before you Perform Full Scan, you must Update the program 1st.
6. Perform Full Scan once the update is complete, this may take up to few minutes or a hour, I suggest you go and do something else and periodically check on the status of the scan.
7. Once the scan complete, click OK on the prompt window.
8. A screen displaying all the malware that the program found will be shown. You should now click on the Remove Selected button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When removing the files, MBAM may require a reboot in order to remove some of them. If it displays a message stating that it needs to reboot, please allow it to DO SO. Once your computer has rebooted, the Internet Security 2010 should has been deleted.

If you looking for some FREE antivirus for your computer, I’ll suggest you download:-

1. AVG
2. Bit Defender

Apple have launched the latest firmware version 3.1.2 for iPhone, but I can’t update to this version due to the Sim Lock.

I have successfully upgrade mine from Version 2.2 to Version 3.0 today.

The simple step as below:-

***DO IT AT YOUR OWN RISK***

***BACKUP YOUR DATA 1st, ALL YOUR DATA WILL BE REMOVED AFTER UPGRADE***
1. Download the iPhone 3.0.1 Firmware

2. Open the iTunes, when it prompt to update version 3.1.2, just ignore. Then Hold your Shift (for Win PC) or Hold Option (for MAC) when click Restore button, browse to the downloaded firmware and continue the restoration process.

Your phone will be reboot.

GOT YA!!! you phone is now TOTALLY BLOCKED! you can’t do anything!!! but DON’T PANIC. (but I do until I found out how to fix it).

3. Download redsnOw 0.8
- For Windows
- For MAC

4. Download Jailbreak Firmware (NOTE: filename is different from the 1st one u downloaded)

5. Run redsnOw and browse to the Jailbreak firmware and follow it instruction. (NOTE: if the screen stop at Reboot Device, just unplug the USB cable and plug it back)

After Step 5, your iPhone will be functioning now, but you still can’t connect to your Telco, until you complete Step 6 & 7.

6. Once the step 5 complete, goto Cydia, and install updates.

7. Once the update is done, goto Cydia again, and install ultrasnOw

8. You’re DONE! your phone should work as normal now!

Hope you enjoy the fun of DIY.

Everything work fine and as simple as a click.